Delilah Vertical Beater Manure Spreaders

Reliable performance
Accurate spreading

About this product:

Overview

Overview

The DV series models are constructed with 6mm floor panels and 4mm side panels. The floor is hydraulically driven with two chains and a single floor slat. 16mm
floor chains are used up to and including DV175 with 65mm rear floor shaft. 20mm floor chains and larger slats on the HD machines with 80mm rear floor shaft.
The body is 1550mm wide with a flared top to create a wider top area for easy loading and less spillage. Rotors are 890mm diameter on the DV175 and below 1100mm
diameter on the HD Models. With large diameter rotors and a high tip speed the Delilah DV series spreaders offer wide spreading width and excellent shredding on a
wide range of manures, composts, and sludges.

Features

Features

  • One spreader, two spreading options - Available on spreaders with 1100mm diameter rotors, the option of hydraulic folding canopy doors allows the spreader to be used as a vertical beater spreader or as a spinning disc spreader when the doors are closed. 
  • Trouble-free running - We use the highest quality bearings, bearing assemblies and bushings with easy access grease points, so your Delilah keeps working with minimal down time. The electronically balanced spreading rotors eliminate vibration during operation.
  • Maximum output - Large diameter rotors and a high tip speed give you wide spreading width and excellent shredding on a range of manures, composts and sludges.

Key features of our spreaders

Downloads Gallery Options

Options

  • Range of flotation tyres to suit your needs
  • Hydraulic slurry door
  • Hydraulic folding canopy doors
  • Sprung drawbar
  • Air brakes 
  • Mudguards 
  • Hydraulic floor tensioning 
  • Lift off canopy (models D4080 - D4140)
  • Rear drawbar with brakes and electrics
  • Electronic bed speed control
  • Weighing Equipment with display mounted on the spreader, 4 weight cells 
  • Griffith Elder load cell weighing and constant application rate control
Video

Video

Dimensions

Dimensions

* Dimesions dependednt on tyre sizing (580/70R38 shown)

DV080

DV080

Area Unit
Metric Imperial
𝗣𝗿𝗲𝘃𝗶𝗼𝘂𝘀 𝗠𝗼𝗱𝗲𝗹 𝗡𝗮𝗺𝗲
Chassis Size Short
Level fill m³
6.1 m³
215 ft³
Heaped fill 𝘁𝗼 𝘀𝗹𝘂𝗿𝗿𝘆 𝗴𝗮𝘁𝗲 (𝗘𝘂𝗿𝗼𝗽𝗲)
8.4 m³
297 ft³
Heaped fill to 𝘁𝗼 𝗰𝗲𝗻𝘁𝗿𝗲 𝗼𝗳 𝗥𝗼𝘁𝗼𝗿𝘀 (𝗨𝗞)
9.7 m³
343 ft³
Overall Length
6,430 mm
253"
Overall Height
3,313 mm
130"
Overall Width
2,995 mm
118"
Interior Length
3,700 mm
146"
Interior width at bottom
1,550 mm
61"
Interior width at top - loading width
2,125 mm
84"
Interior height
1,000 mm
146"
Loading height *
2,200 mm
87"
Axle carrying capacity 14,000 Kg
Number of axles 1
Axle Track
2.3m
90"
Axle beam
150x150x15 mm
6x6x19/32"
Brake size ( Ø xW)
420x180 mm
16.53x7.08"
Standard tyre size 23.3x26
Rotor Ø
890 mm
35.03"
Floor chains (qty x Ø, mm)
2x16 mm
2x 5/8"
Floor driveshaft Ø (mm)
65 mm
2 9/16"
Power requirement (hp) 80
PTO speed (rpm) 1000
Tare weight 4,895 Kg
Heap volume
2.3(m³)
81( ft³)
Level fill
6.1(m³)
215( ft³)
DV100

DV100

Area Unit
Metric Imperial
𝗣𝗿𝗲𝘃𝗶𝗼𝘂𝘀 𝗠𝗼𝗱𝗲𝗹 𝗡𝗮𝗺𝗲 D4080
Chassis Size Short
Level fill m³
7,6 m³
268"
Heaped fill 𝘁𝗼 𝘀𝗹𝘂𝗿𝗿𝘆 𝗴𝗮𝘁𝗲 (𝗘𝘂𝗿𝗼𝗽𝗲)
9.9 m³
350"
Heaped fill to 𝘁𝗼 𝗰𝗲𝗻𝘁𝗿𝗲 𝗼𝗳 𝗥𝗼𝘁𝗼𝗿𝘀 (𝗨𝗞)
11.5 m³
406"
Overall Length
6,430 mm
253"
Overall Height
3,313 mm
130"
Overall Width
2,995 mm
118"
Interior Length
3,700 mm
146"
Interior width at bottom
1,550 mm
61"
Interior width at top - loading width
2,125 mm
84"
Interior height
1,250 mm
49"
Loading height *
2,450 mm
96"
Axle carrying capacity 14,000 Kg
Number of axles 1
Axle Track
2.30m
90"
Axle beam
150x150x15 mm
6x6x19/32"
Brake size ( Ø xW)
420x180 mm
16.53x7.08"
Standard tyre size
23.1x26
23.1x26
Rotor Ø
890 mm
35.03"
Floor chains (qty x Ø, mm)
2 x 16 mm
2 x 5/8"
Floor driveshaft Ø (mm)
65 mm
2 9/16"
Power requirement (hp) 95
PTO speed (rpm) 1000
Tare weight 4,895 Kg
Heap volume
2.3 (m3)
81 (cu ft)
Level fill
6.1 (m3)
215 (cu ft)
DV120

DV120

Area Unit
Metric Imperial
𝗣𝗿𝗲𝘃𝗶𝗼𝘂𝘀 𝗠𝗼𝗱𝗲𝗹 𝗡𝗮𝗺𝗲 D4100 Compact 10
Chassis Size Short
Level fill m³
9.8 m³
346 ft³
Heaped fill 𝘁𝗼 𝘀𝗹𝘂𝗿𝗿𝘆 𝗴𝗮𝘁𝗲 (𝗘𝘂𝗿𝗼𝗽𝗲)
12.1 m³
427 ft³
Heaped fill to 𝘁𝗼 𝗰𝗲𝗻𝘁𝗿𝗲 𝗼𝗳 𝗥𝗼𝘁𝗼𝗿𝘀 (𝗨𝗞)
14.1 m³
498 ft³
Overall Length
6,430 mm
253"
Overall Height
3,433 mm
135"
Overall Width
2,995 mm
118"
Interior Length
3,700 mm
146"
Interior width at bottom
1,550 mm
61"
Interior width at top - loading width
2,125 mm
84"
Interior height
1,480 mm
59"
Loading height *
2,820 mm
111"
Axle carrying capacity 14,000 Kg
Number of axles 1
Axle Track
2.30m
90"
Axle beam
150x150x15 mm
6x6x19/32"
Brake size ( Ø xW)
420x180 mm
16.53x7.08"
Standard tyre size 580/70R38
Rotor Ø
890 mm
35.03"
Floor chains (qty x Ø, mm)
2 x 16 mm
2 x 5/8"
Floor driveshaft Ø (mm)
65 mm
2 9/16"
Power requirement (hp) 125
PTO speed (rpm) 1000
Tare weight 4,995 Kg
Heap volume
12.1(m³)
427(ft³)
Level fill
9.8(m³)
346(ft³)
DV110

DV110

Area Unit
Metric Imperial
𝗣𝗿𝗲𝘃𝗶𝗼𝘂𝘀 𝗠𝗼𝗱𝗲𝗹 𝗡𝗮𝗺𝗲 D4095
Chassis Size Medium
Level fill m³
7,8 m³
339 ft³
Heaped fill 𝘁𝗼 𝘀𝗹𝘂𝗿𝗿𝘆 𝗴𝗮𝘁𝗲 (𝗘𝘂𝗿𝗼𝗽𝗲)
10,7 m³
445 ft³
Heaped fill to 𝘁𝗼 𝗰𝗲𝗻𝘁𝗿𝗲 𝗼𝗳 𝗥𝗼𝘁𝗼𝗿𝘀 (𝗨𝗞)
11.3 m³
399 ft³
Overall Length
7,475 mm
294"
Overall Height
3,020 mm
119"
Overall Width
2,995 mm
118"
Interior Length
4,700 mm
185"
Interior width at bottom
1,550 mm
61"
Interior width at top - loading width
2,125 mm
84"
Interior height
1,000 mm
39"
Loading height *
2,200 mm
87"
Axle carrying capacity 14,000 Kg
Number of axles 1
Axle Track
2.30m
90"
Axle beam
150x150x15 mm
6x6x19/32"
Brake size ( Ø xW)
420x180 mm
16.53x7.08"
Standard tyre size 23.1x26
Rotor Ø
890 mm
35.03"
Floor chains (qty x Ø, mm)
2 x 16 mm
2 x 5/8"
Floor driveshaft Ø (mm)
65 mm
2 9/16"
Power requirement (hp) 105
PTO speed (rpm) 1000
Tare weight 5,530 Kg
Heap volume
10.7(m³)
378(ft³)
Level fill
7.8(m³)
275(ft³)
DV125

DV125

Area Unit
Metric Imperial
𝗣𝗿𝗲𝘃𝗶𝗼𝘂𝘀 𝗠𝗼𝗱𝗲𝗹 𝗡𝗮𝗺𝗲 D4100
Chassis Size Medium
Level fill m³
9.6 m³
339 ft³
Heaped fill 𝘁𝗼 𝘀𝗹𝘂𝗿𝗿𝘆 𝗴𝗮𝘁𝗲 (𝗘𝘂𝗿𝗼𝗽𝗲)
12.6 m³
445 ft³
Heaped fill to 𝘁𝗼 𝗰𝗲𝗻𝘁𝗿𝗲 𝗼𝗳 𝗥𝗼𝘁𝗼𝗿𝘀 (𝗨𝗞)
13.8 m³
487 ft³
Overall Length
7,475 mm
294"
Overall Height
3,433 mm
135"
Overall Width
2,995 mm
118"
Interior Length
4,700 mm
185"
Interior width at bottom
1,550 mm
61"
Interior width at top - loading width
2,125 mm
84"
Interior height
1,250 mm
49"
Loading height *
2,570 mm
101"
Axle carrying capacity 14,000 Kg
Number of axles 1
Axle Track
2.30m
90"
Axle beam
150x150x15 mm
6x6x5/8"
Brake size ( Ø xW)
420x180 mm
16.53x70.8"
Standard tyre size 580/70R38
Rotor Ø
890 mm
35.03"
Floor chains (qty x Ø, mm)
2 x 16mm
2 x 5/8"
Floor driveshaft Ø (mm)
65 mm
2 9/16"
Power requirement (hp) 125
PTO speed (rpm) 1000
Tare weight 5,630 Kg
Heap volume
12.6(m³)
445(ft³)
Level fill
9.6(m³)
339(ft³)
DV145

DV145

Area Unit
Metric Imperial
𝗣𝗿𝗲𝘃𝗶𝗼𝘂𝘀 𝗠𝗼𝗱𝗲𝗹 𝗡𝗮𝗺𝗲 D4120 Compact 12
Chassis Size Medium
Level fill m³
11.5 m³
406 ft³
Heaped fill 𝘁𝗼 𝘀𝗹𝘂𝗿𝗿𝘆 𝗴𝗮𝘁𝗲 (𝗘𝘂𝗿𝗼𝗽𝗲)
14.5 m³
512 ft³
Heaped fill to 𝘁𝗼 𝗰𝗲𝗻𝘁𝗿𝗲 𝗼𝗳 𝗥𝗼𝘁𝗼𝗿𝘀 (𝗨𝗞)
15.9 m³
562 ft³
Overall Length
7,475 mm
294"
Overall Height
3,637 mm
143"
Overall Width
2,995 mm
118"
Interior Length
4,700 mm
185"
Interior width at bottom
1,550 mm
61"
Interior width at top - loading width
2,125 mm
84"
Interior height
1,500 mm
59"
Loading height *
2,820 mm
111"
Axle carrying capacity 16,200 Kg
Number of axles 1
Axle Track
2.30m
90"
Axle beam
150x150x16
6x6x5/8"
Brake size ( Ø xW)
420x220
16.53x8.66"
Standard tyre size 580/70R38
Rotor Ø
890 mm
35.03"
Floor chains (qty x Ø, mm)
2 x 16 mm
2 x 5/8"
Floor driveshaft Ø (mm)
65
2 9/16"
Power requirement (hp) 150
PTO speed (rpm) 1000
Tare weight 5,730 Kg
Heap volume
14.5(m³)
512(ft³)
Level fill
11.5(m³)
406(ft³)
DV130

DV130

Area Unit
Metric Imperial
𝗣𝗿𝗲𝘃𝗶𝗼𝘂𝘀 𝗠𝗼𝗱𝗲𝗹 𝗡𝗮𝗺𝗲
Chassis Size Long
Level fill m³
9.4 m³
332 ft³
Heaped fill 𝘁𝗼 𝘀𝗹𝘂𝗿𝗿𝘆 𝗴𝗮𝘁𝗲 (𝗘𝘂𝗿𝗼𝗽𝗲)
13.0 m³
459 ft³
Heaped fill to 𝘁𝗼 𝗰𝗲𝗻𝘁𝗿𝗲 𝗼𝗳 𝗥𝗼𝘁𝗼𝗿𝘀 (𝗨𝗞)
14.1 m³
498 ft³
Overall Length
8,475 mm
334"
Overall Height
3,020 mm
119"
Overall Width
2,995 mm
118"
Interior Length
5,700 mm
224"
Interior width at bottom
1,550 mm
61"
Interior width at top - loading width
2,125 mm
84"
Interior height
1,000
39"
Loading height *
2,320 mm
81"
Axle carrying capacity 16,200 kg
Number of axles 1
Axle Track
2.3 m
90"
Axle beam
150x150x16 mm
6x6x5/8"
Brake size ( Ø xW)
420x220
16.53x8.66"
Standard tyre size 580/70R38
Rotor Ø
890 mm
35.03"
Floor chains (qty x Ø, mm)
2x16 mm
2 x 5/8"
Floor driveshaft Ø (mm)
65 mm
2 9/16"
Power requirement (hp) 150
PTO speed (rpm) 1000
Tare weight 6,120 Kg
Heap volume
13.0(m³)
459(ft³)
Level fill
9.4(m³)
332(ft³)
DV150

DV150

Area Unit
Metric Imperial
𝗣𝗿𝗲𝘃𝗶𝗼𝘂𝘀 𝗠𝗼𝗱𝗲𝗹 𝗡𝗮𝗺𝗲 D4120
Chassis Size Long
Level fill m³
11.6 m³
410 ft³
Heaped fill 𝘁𝗼 𝘀𝗹𝘂𝗿𝗿𝘆 𝗴𝗮𝘁𝗲 (𝗘𝘂𝗿𝗼𝗽𝗲)
15.2 m³
537 ft³
Heaped fill to 𝘁𝗼 𝗰𝗲𝗻𝘁𝗿𝗲 𝗼𝗳 𝗥𝗼𝘁𝗼𝗿𝘀 (𝗨𝗞)
16.5 m³
664 ft³
Overall Length
8,475 mm
334"
Overall Height
3,433 mm
135"
Overall Width
2,995 mm
118"
Interior Length
5,700 mm
224"
Interior width at bottom
1,550 mm
61"
Interior width at top - loading width
2,125 mm
84"
Interior height
1,250 mm
49"
Loading height *
2,570 mm
101"
Axle carrying capacity 16,200 Kg
Number of axles 1
Axle Track
2.30m
90"
Axle beam
150x150x16 mm
6x6x5/8"
Brake size ( Ø xW)
420x220 mm
16.53x8.66"
Standard tyre size 580/70R38
Rotor Ø
890 mm
35.03"
Floor chains (qty x Ø, mm)
2 x 16 mm
2 x 5/8"
Floor driveshaft Ø (mm)
65 mm
2 9/16"
Power requirement (hp) 150
PTO speed (rpm) 1000
Tare weight 6,120 Kg
Heap volume
15.2(m³)
537(ft³)
Level fill
11.6(m³)
410(ft³)
DV175

DV175

Area Unit
Metric Imperial
𝗣𝗿𝗲𝘃𝗶𝗼𝘂𝘀 𝗠𝗼𝗱𝗲𝗹 𝗡𝗮𝗺𝗲 D4140
Chassis Size Long
Level fill m³
13.7 m³
484 ft³
Heaped fill 𝘁𝗼 𝘀𝗹𝘂𝗿𝗿𝘆 𝗴𝗮𝘁𝗲 (𝗘𝘂𝗿𝗼𝗽𝗲)
17.3 m³
611 ft³
Heaped fill to 𝘁𝗼 𝗰𝗲𝗻𝘁𝗿𝗲 𝗼𝗳 𝗥𝗼𝘁𝗼𝗿𝘀 (𝗨𝗞)
18.8 m³
664 ft³
Overall Length
8,475 mm
334"
Overall Height
3,637 mm
143"
Overall Width
2,995 mm
118"
Interior Length
5,700 mm
224"
Interior width at bottom
1,550 mm
61"
Interior width at top - loading width
2,125 mm
84"
Interior height
1,500 mm
59"
Loading height *
2,820 mm
111"
Axle carrying capacity 16,200 Kg
Number of axles 1
Axle Track 2.30m
Axle beam
150x150x16 mm
6x6x5/8"
Brake size ( Ø xW)
420x220 mm
16.53x8.66"
Standard tyre size 580/70R38
Rotor Ø
890 mm
35.03"
Floor chains (qty x Ø, mm)
2 x 16mm
2 x 5/8"
Floor driveshaft Ø (mm)
65 mm
2 9/16"
Power requirement (hp) 160
PTO speed (rpm) 1000
Tare weight 6,220 Kg
Heap volume
17.3(m³)
611(ft³)
Level fill
13.7(m³)
484(ft³)
DV150HD

DV150HD

Area Unit
Metric Imperial
𝗣𝗿𝗲𝘃𝗶𝗼𝘂𝘀 𝗠𝗼𝗱𝗲𝗹 𝗡𝗮𝗺𝗲 D4130
Chassis Size Long HD
Level fill m³
11.6 m³
410 ft³
Heaped fill 𝘁𝗼 𝘀𝗹𝘂𝗿𝗿𝘆 𝗴𝗮𝘁𝗲 (𝗘𝘂𝗿𝗼𝗽𝗲)
15.2 m³
537 ft³
Heaped fill to 𝘁𝗼 𝗰𝗲𝗻𝘁𝗿𝗲 𝗼𝗳 𝗥𝗼𝘁𝗼𝗿𝘀 (𝗨𝗞)
16.6 m³
586 ft³
Overall Length
8,475 mm
334"
Overall Height
3,433 mm
135"
Overall Width
2,995 mm
118"
Interior Length
5,700 mm
224"
Interior width at bottom
1,550 mm
61"
Interior width at top - loading width
2,125 mm
84"
Interior height
1,250 mm
49"
Loading height *
2,570 mm
101"
Axle carrying capacity 16,200 Kg
Number of axles 1
Axle Track
2,30m
90"
Axle beam
150x150x16 mm
6x6x5/8"
Brake size ( Ø xW)
420x220 mm
16.53x8.66"
Standard tyre size 580/70R38
Rotor Ø
1100 mm
43.30"
Floor chains (qty x Ø, mm)
2 x 20mm
2 x 25/32"
Floor driveshaft Ø (mm)
80 mm
3 5/32"
Power requirement (hp) 170
PTO speed (rpm) 1000
Tare weight 6,120 Kg
Heap volume
15.2(m³)
537(ft³)
Level fill
11.6(m³)
410(ft³)
DV175HD

DV175HD

Area Unit
Metric Imperial
𝗣𝗿𝗲𝘃𝗶𝗼𝘂𝘀 𝗠𝗼𝗱𝗲𝗹 𝗡𝗮𝗺𝗲 D4150
Chassis Size Long HD
Level fill m³
13.7 m³
484 ft³
Heaped fill 𝘁𝗼 𝘀𝗹𝘂𝗿𝗿𝘆 𝗴𝗮𝘁𝗲 (𝗘𝘂𝗿𝗼𝗽𝗲)
17.3 m³
611 ft³
Heaped fill to 𝘁𝗼 𝗰𝗲𝗻𝘁𝗿𝗲 𝗼𝗳 𝗥𝗼𝘁𝗼𝗿𝘀 (𝗨𝗞)
18.8 m³
664 ft³
Overall Length
8,475 mm
334"
Overall Height
3,637 mm
143"
Overall Width
2,995 mm
118"
Interior Length
5,700 mm
224"
Interior width at bottom
1,550 mm
61"
Interior width at top - loading width
2,125 mm
84"
Interior height
1,500 mm
59"
Loading height *
2,820 mm
111"
Axle carrying capacity 16,200 Kg
Number of axles 1
Axle Track
2.30m
90"
Axle beam
150x150x16 mm
6x6x5/8"
Brake size ( Ø xW)
420x220 mm
16.53x8.66"
Standard tyre size 580/70R38
Rotor Ø
1100 mm
43.30"
Floor chains (qty x Ø, mm)
2 x 20mm
2 x 25/32"
Floor driveshaft Ø (mm)
80 mm
3 5/32"
Power requirement (hp) 180
PTO speed (rpm) 1000
Tare weight 6,500 Kg
Heap volume
17.3(m³)
611(ft³)
Level fill
13.7(m³)
484(ft³)
STD Features

STD Features

  • Robust construction with 6mm floor, 4mm sides and flared top rail for easier loading
  • Variable floor speed control, pressure protected with reverse function
  • Hydraulic services carried in rigid pipework to reduce maintenance
  • 2 heavy-duty floor chains with individual tensioning, 16mm or 20mm
  • 65mm or 80mm floor drive shaft with 7 tooth self-cleaning sprockets
  • 1.7m or 2.0m wide rotor spreading deck
  • 10mm continuous spiral rotors for maximum shredding and spreading, choice of 890mm or 1100mm rotors
  • Disc rotor base with three blades on 1100mm rotors
  • Hardened rotor blades with break back stops
  • Wide angled PTO shaft with shearbolt protection
  • One piece gearbox unit with up to 248HP rating
  • Rattle clutch on rear gearbox drive
  • Extra wide stone guard on headboard
  • LED lights
  • Automatic light protectors with slurry door option

Standard Equipment

Find your nearest dealer

From our international network

Similar products