Delilah Spinning Disc Manure Spreader

Accurate spreading control
Low application rates

About this product:

Overview

Overview

The Delilah 5000 series has twin horizontal beaters and spinning discs, with 6, 3 or 2 blade configuration. For accurate spreading control the lower canopy and blade angle is adjustable. The machines are equipped with a hydraulically operated slurry door, full opening rear canopy and adjustable lower door section. Full width, close spaced floor slats and adjustable floor speed control ensure a constant delivery for better spread control.

Available in 12 and 15 tonne models with a range of options, the Delilah spinning disc spreader is suitable for wide spread applications and high accuracy spreading.

Features

Features

  • High performance spreading - the 5000 series spreaders use twin horizontal beaters and spinning discs. Discs can be run with a 6, 3 or 2 blade configuration with blade angle adjustment and lower canopy adjustment allowing you to set the spreading unit for the job in hand. 
  • Trouble-free running - We use the highest quality bearings, bearing assemblies and bushings with easy access grease points, so your Delilah keeps working with minimal down time. The electronically balanced spreading rotors eliminate vibration during operation.

Key features of our spreaders

Downloads Gallery Options

Options

  • Choice of tyres to suit your needs
  • Sprung draw bar
  • Rear drawbar with brakes and electrics
  • Electronic bed speed control
  • GPS ground speed control with valve block
  • Fully automated weighing and recording equipment with GPS
  • Weigh cells
  • Headland limiter 
Video

Video

Dimensions

Dimensions

D5130

D5130

Area Unit
Metric Imperial
Interior length (mm) 5,670
Overall height ((mm) 3,710
Interior height (mm) 1,230
Interior width at bottom (mm) 1,550
Overall width (mm) 2,990
Loading height (mm) 2,500
Overall length (mm) 7,895
Interior width at top - loading width (mm) 2,125
Level fill cu.m 11.6 cu.m
Heaped fill cu.m 15.2 cu.m
Axle carrying capacity (kg) 16,200
Axle beam (mm) 150x150x16
Brake size (Ø x W, mm) 420x220
Standard tyre size 580/70R38
Rotor Ø (mm) 614
Disc Ø (mm) 110
Floor chains (qty x Ø, mm) 2 x 20mm
Floor driveshaft Ø (mm) 80
Power requirement (hp) 200
PTO Speed (rpm) 1000
Tare weight (kg) 6,225
D5150

D5150

Area Unit
Metric Imperial
Interior length (mm) 5,670
Overall height ((mm) 3,710
Interior height (mm) 1,480
Interior width at bottom (mm) 1,550
Overall width (mm) 2,990
Loading height (mm) 2,750
Overall length (mm) 8,895
Interior width at top - loading width (mm) 2,125
Level fill cu.m 13.7 cu.m
Heaped fill cu.m 17.3 cu.m
Axle carrying capacity (kg) 16,200
Axle beam (mm) 150x150x16
Brake size (Ø x W, mm) 420x220
Standard tyre size 580/70R38
Rotor Ø (mm) 614
Disc Ø (mm) 1100
Floor chains (qty x Ø, mm) 2 x 20mm
Floor driveshaft Ø (mm) 80
Power requirement (hp) 220
PTO Speed (rpm) 1000
Tare weight (kg) 6,325
STD Features

STD Features

  • Hydraulic slurry door
  • Variable speed hydraulic floor drive
  • Hydraulic full opening rear canopy
  • Adjustable lower canopy section
  • Wide angled PTO shaft with shear bolt protection and rattle clutch
Tyres, Axles, Brakes, Paint

Tyres, Axles, Brakes, Paint

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi commodo leo ex, ac pharetra eros auctor sed. Nulla id magna a tellus venenatis facilisis id a ipsum. In ullamcorper sem lacus, at pharetra velit varius ultricies. Phasellus id massa eu ipsum fringilla egestas non ut mauris. Donec finibus porttitor arcu a dignissim.

Tyres, Axles, Brakes and Paint

Find your nearest dealer

From our international network

Similar products